|
| |
Keep checking back for info on High Performance
Sports, Rox, Redeye Racing, Sportech, HJC, Klotz®,
Scott USA, Mechanix wear®, the ultimate gas rack
replacement for your snow machine or freight sled, and more...
Ski-Doo
Accessories
,
but this page not yet complete.
High Performance Sports
Sled Stingers
Ski Doo ZX & REV Chassis Stingers for 600,
600HO, 700, 800, 1000's
Polaris Edge Chassis 700/800
Arctic Cat M600 & M700
Product Update:
Here are
the 2002 800 dyno run results:
The stock system cranked out 134.8 H.P. (corrected) @ 7900 rpm (sled
tachometer).
After a few dyno runs they have found a very strong additional 4.5 H.P. @ 7900
rpm with their two chamber pressure rebounding stinger/muffler.
Their stinger at 8100 rpm is developing 8.6 H.P. over stock. They ran several
dyno runs to verify these numbers. The weight savings is a whopping 9.5 lbs.
Rox Handlebar Risers
for
ATV'S and Snowmobiles
Dual rotation points makes Rox Riser selectively adjustable forward and back.
Whether you're large and/or like to stand up or small and want your handlebars
brought back toward you, Rox Riser can put you in the comfort zone.
With its two piece design, Rox Riser will install on virtually any sled or ATV
that has clamps to hold the handlebars, making it incredibly universal.
Rox Sledtreds
 
Originally
designed and built for snowcrossers. Offers a wider, aggressive, more
comfortable running board platform to accommodate the stand-up riding style. The
need for a stronger running board was also engineered into this product;
strength that more than compensates for the additional leverage from a wider
platform.
|
EXTENDED FLARE |
|
  |
| Adds even more room to
your Sledtreds runningboards.
For an even
more aggressive running board configuration, add the Extended Flare
Attachment. It can be placed anywhere along the outside edge to fit your
needs and riding position.
Installation is made easy by using 8-32
screws to attach flare to the top of Sledtred and 3/16 rivets (provided)
from below through flare support in to rolled edge.
Location
The typical location of the flare for Midwestern riders is shown in the
photo. Mountain riders typically mount closer to the rear of the sled.
Flare Support
Flare supports are available in natural aluminum only. Shown here in black
for easy distinction. |
Hotdogger IV
cooks up a mouth-watering meal while you burn up the trail on your snowmobile!
- Easily attaches in just minutes to your sled's
muffler to take advantage of it's heat and cook up a tasty meal or snack for
you and your crew. No need to lug along a grill or camp stove
- Just wrap your food in foil, place it in the
Hotdogger IV and hit the trail! Cooking time varies depending on riding
conditions and snow conditions. In general, the harder your sled works, the
more heat your exhaust generates, resulting in faster cooking time for your
goodies. You'll know your food is done when the aroma starts making your mouth
water!
- Removable pan quickly snaps in and out of base
allowing you to remove your food without fully detaching the mounting base
from your muffler. This lets you easily cook more than one batch of whatever's
on the menu
- Solid bottom design and snap-tight lid prevent
messy spillage while riding
- Many possibilities for on-the-go grub, including Hot
Dogs, Brats, Burritos, Hot Pockets, Chicken Wings and more. Add some chopped
onions or peppers to kick things up a notch! That's not all... it'll warm-up
your sweets, too! Try Sweet Rolls, Apple Turnovers, Pop Tarts or Sticky Buns.
Use your imagination... the menu can be limitless!
- Measures 7 3/4
x 5 x 1 5/8" overall.
Includes 23" long, 9/16"
worm-drive hose clamp for attaching to muffler
Tasty, on-the-go grub... no grill needed! Regularly
$34.95 On Sale Now Only $32.50
More accessories available from K&N, Bully Dog,
PIAA, APC, Lund, DEE ZEE, Deflectashield, Westin, Steel Horse, Smittybuilt,
Stull, Warn, Ski-Doo, and more.
E-mail us or give us a call at 907-262-3210 for more information on parts &
accessories!
|
