|
An excellent choice of HDPE materials has been made for fabrication of the
Oil SafeŽ lubricant storage and dispensing system. The materials have been
selected for their superb physical and mechanical properties, including
impact strength and chemical resistance. |
| |
|
State of the art UV radiation stabilizers and anti-static agents have been
incorporated to protect Oil SafeŽ from the ravages of UV degradation and the
accumulation of static electricity, resulting in a product which will
perform well under even the harshest of environmental conditions. |
| |
|
Approximate Specifications |
|
2
Liter Drum (2 U.S. Quarts) |
|
Neck Diameter (Opening) |
120mm |
4.80in |
|
Base Diameter |
165mm |
6.60in |
|
Height |
220mm |
8.80in |
|
Weight |
398 grams |
13.93oz |
|
3
Liter Drum (3 U.S. Quarts) |
|
Neck Diameter (Opening) |
120mm |
4.80in |
|
Base Diameter |
170mm |
6.80in |
|
Height |
265mm |
10.60in |
|
Weight |
444 grams |
15.54oz |
|
5
Liter Drum (5 U.S. Quarts) |
|
Neck Diameter (Opening) |
120mm |
4.80in |
|
Base Diameter |
175mm |
7.00in |
|
Height |
275mm |
11.00in |
|
Weight |
635 grams |
22.23oz |
|
10
Liter Drum (10 U.S. Quarts) |
|
Neck Diameter (Opening) |
120mm |
4.80in |
|
Base Diameter |
245mm |
9.80in |
|
Height |
345mm |
13.80in |
|
Weight |
880 grams |
30.80oz |
|
Storage Lid |
|
Outside Diameter |
146mm |
5.84in |
|
Overall Height |
105mm |
4.20in |
|
Weight |
240 grams |
8.40oz |
|
Stretch Lid |
|
Outside Diameter |
146mm |
5.84in |
|
Overall Height (from base of lid to tip of spout) |
156mm |
6.24in |
|
Weight (With HDPE Push-Pull Valve) |
378 grams |
13.23oz |
|
Utility Lid |
|
Outside Diameter |
146mm |
5.84in |
|
Overall Height |
119mm |
4.76in |
|
Weight |
240 grams |
8.40oz |
|
Stumpy Lid |
|
Outside Diameter |
146mm |
5.84in |
|
Overall Height |
156mm |
6.24in |
|
Weight |
378 grams |
13.23oz |
|
Oil Safe Pump |
|
Overall Pump Length |
440mm |
17.32in |
|
Discharge Hose Length |
1,500mm |
59.06in |
|
Approximately 14 Strokes to the Liter/Quart. Fitted with anti-drip nozzle &
anti-kink hose. Ground shaft with o-ring seal. |
|
|
| |
|
Suitable for use with lubricating and gear oils of viscosity ranges up to: |
|
ISO 320 - 680 |
|
AGMA Grades 6 - 8 |
|
SAE 140 Gear Oil |
|
Service Temperature Range |
|
-40°C up to 80°C /-40°F up to 176°F |
|
Sealing Members |
|
Nitrile O'Rings (Buna N) N7 70 Durometer |
|
Additives |
|
UV Stabilizers & Anti-statics |
|
Chemical Resistance |
|
High Density Polyethylene (HDPE) is a very chemically resistant plastic,
however contact with strong oxidizing acids should be avoided eg. Ozone,
Hydrogen Peroxide, Halogen etc. Any queries regarding the resistance of HDPE
against specific chemicals should be directed to the manufacturer. |
|
Do not use Oil Safe products for fuels or solvents. |
| |
|
Keep away from naked flames or excessive heat. |
| |
|
Avoid prolonged or repeated skin contact with used oil. |
|
Oil SafeŽ is a registered trademark. Oil Safe products are protected by
registered designs and patent pending. |
